Radioddity GD-88 - Mandown

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 151 of 252
12.9.16 GPS channel
Once GPS activated, the Radioddity DB25-D, DB40-D or GD-88 will send the GPS
data to others from the appointed channel. It can be any digital channel including
the channel selected by channel selector.
Default: off
12.9.17 Mandown
By setting this parameter, the Mandown alarm can be turned On or Off.
Default: On
12.9.18 Mandown Interval
By setting this parameter, the user can make the Radioddity GD-88 still send out
the alarm at a certain interval before it exits the mandown state.
Recommended: 5 min
12.9.19 Mandown Angle
By setting this parameter, when the Angle between the falling and the horizontal
surface of the Radioddity GD-88 is less than this parameter, an alarm will be given.
Recommended: 60°
Notes: When the radio is perpendicular to the ground, it is 90°.
12.9.20 Mandown Alarm Duration
By setting this parameter, user can specify the length of time for the Radioddity
GD-88 to send a mandown alarm in the analog channel.
Recommended: 10 s
Notes: The alarm duration of the digital channel is configured by the parameters of
the digital alarm list corresponding to the channel.
12.9.21 Inactive Time
This option and its value are not applicable for the Radioddity DB25-D, DB40-D or
the GD-88. Please ignore it.