Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 76 of 252
• Input the first few digits of the private contact ID to search using the numeric
keypad of the Speaker-Microphone → press the [OK]-key to confirm → the
display shows the search results → rotate the [ENC] knob or use the [▲/▼]-
keys to choose the desired ID.
4. Press the [PTT]-key to initiate a private call or press the [Select]-key, rotate the
[ENC] knob or use the [▲/▼]-keys to choose from the following options:
(1) Application → press the [Select]-key → Rotate the [ENC] knob or use the
[▲/▼]-keys to choose either Radio Check, Call Alert, Remote Mon.(Monitor),
Radio Disable or Radio Enable → press the [Select]-key to send→ ‘OK’ or ‘Fail’
text pops up on the screen → press the [Back]-key to return to the previous
level.
(2) SendMsg → press the [Select]-key to Edit a SMS → rotate the [ENC] knob
or use the [▲/▼]-keys to choose either SendMsg (Send Message),
lnsertComMsg (Insert Common Message), Save or ExitEditor → press the
[Select]-key to confirm the selected option → return to the previous level.
(3) Details → press the [Select]-key → the display shows ID, nick name, name,
city, province, country etc. information → press the [Back] to return to the
previous level.
Notes: The ‘128 Bytes’ records mode must be selected first before writing a Ham
Private Contacts list to the radio, so that all details like name, city, province,
country, etc. information will be imported. However, the import of that data
requires a long writing time (about an hour). Make sure the radio keeps
normal power supply during the writing process (GD-88: Fully charge the
battery before starting the write-process). If ‘16 Bytes’ records mode is selected
before writing Ham Private Contacts list, only the contact ID and Nick name
will be imported. This mode has a shorter writing time of just about 15
minutes. Make sure the radio keeps normal power supply during the writing
process.
10.1.5 Ham Group Contacts
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to select Contacts and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to select the Ham Group
Contacts, press the [Select]-key to enter the Ham Group Call Contacts. Up to
20,000 HAM group contacts can be added.
3. Rotate the [ENC] knob or use the [▲/▼]-keys to choose from the following
options:
(1) Ham Rx Group → press the [Select]-key to turn the option ON / Off.
To Next Page
Loading...
