Radioddity GD-88 - Firmware as of November 21, 2022; Firmware as of October 28, 2022; Initial GD-88 Firmware as of June 6, 2022

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 210 of 252
15.3.3 GD-88 firmware as of November 21
st
, 2022
revision
Changes
released
B49E.D66.EHPSAB.010
2022-11-19 (A)
B49C.D66.EHRNAB.005
2022-11-11 (B)
This firmware has been
withdrawn due to
incompatibility with
newer production batches
• DMR ID data now properly
displayed (no more display of
wrong DMR database data)
• Assignment of 1450 Hz Pilot tone
fixed (does require at least CPS 3.3
DMR CPS_DRS [9.2.16])
• minor fixes within the Talker Alias
display
• support for programming cable
based on FTDI-chip
2022-11-21
15.3.4 GD-88 firmware as of October 28
th
, 2022
revision
Changes
released
B49E.D64.EHRSAB.007
2022-10-27 (A)
B49C.D64.EHRNAB.005
2022-10-28 (B)
• Talker Alias (TA) now supported
• Besides 1750 Hz, the radio now also
supports pilot tones / burst tones
of 700 Hz, 1000 Hz, 1400 Hz, 1450
Hz and 2100 Hz (requires newest
CPS release for support of those)
• Improved behavior of ‘Zone Switch’
P-key
2022-10-28
15.3.5 Initial GD-88 firmware as of June 6
th
, 2022
revision
Changes
released
B49E.D64.EHRSAB.005.
This has been the initial release
2022-06-30