Radioddity GD-88 - New Contact

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 74 of 252
(2) Edit (contact) → Press the [Select]-key → rotate the [ENC] knob or use the
[▲/▼]-keys to choose either Number, Name, Type or Save → press the [Select]-
key to input the number, name, or type (Call Type) and press the [OK]-key to
confirm and return to the previous level → finally select Save → press the [OK]-
key to confirm → ‘Contact Saved’ pops up on the screen → return to the
previous level.
(3) Delete → press the [Select]-key → ‘Are you sure?’ pops up on the screen →
press the [OK]-key to confirm the deletion or press the [Back]-key to cancel the
deletion → return back to the previous level;
(4) SendMsg → press the [Select]-key to Edit a SMS → rotate the [ENC] knob or
use the [▲/▼]-keys to choose either SendMsg (Send Message), lnsertComMsg
(Insert Common Message), Save or ExitEditor → press the [Select]-key to
confirm the selected option → return to the previous level.
(5) Detail -> press the [Select]-key to show any details for that contact as found in
the Ham contacts
10.1.2 New Contact
1. Press the preset [Contacts]-key to access the contact
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to select Contacts and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose New Contact, press the
[Select]-key to choose from one of the following options:
(1) Number → press the [Select]-key → input the numbers using the numeric
keypad of the Speaker-Microphone → press the [OK]-key to confirm → return
back to the previous level.
(2) Name →press the [Select]-key →edit interface → input the characters using
the numeric keypad of the Speaker-Microphone → press the [OK]-key to
confirm → return back to the previous level.
(3) Type → rotate the [ENC] knob or use the [▲/▼]-keys to choose a Call Type
either Group Call or Private Call → press the [OK]-key to confirm → return back
to the previous level
(4) Save → press the [OK]-key to confirm → Return back to the previous level.