Radioddity GD-88 - The Radio Menu Functions in Detail; Contacts; Contact List

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 73 of 252
10 The radio Menu functions in detail
The various functions, applications and parameter configurations of the radio can
be checked and set by menus, if those have been enabled using the Radioddity
CPS.
10.1 Contacts
The contacts provide the ‘address book’ for the radio. Each entry corresponds to
an alias or ID used to initiate a call, as well as operations and advanced DMR
functions.
10.1.1 Contact list
1. Press the preset [Contacts]-key to access the menu.
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to select Contacts and press the [OK]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to select the Contact list → press
the [OK]-key to confirm → select the desired contact
(1) Press the [PTT]-key to initiate a call
(2) Press the [Select]-key to choose from the following options, depending on
the call type of the selected contact
Contact of call type Group Call
(1) SendMsg → press the [Select]-key → Edit SMS → rotate the [ENC] knob or use
the [▲/▼]-keys to choose the option of SendMsg (Send Message),
lnsertComMsg (Insert Common Message), Save or Exit Editor → press the
[Select]-key to confirm → return back to the previous level.
(2) Edit (contact) → Press the [Select]-key → rotate the [ENC] knob or use the
[▲/▼]-keys to choose the option of Number, Name, Type or Save → press the
[Select]-key to input the number and name or Save → press the [OK]-key to
confirm → return to the previous level.
Contact of call type Private Call
(1) Application → press the [Select]-key → Rotate the [ENC] knob or use the
[▲/▼]-keys to choose either Radio Check, Call Alert, Remote Mon.(Monitor),
Radio Disable or Radio Enable → press the [Select]-key to send→ ‘OK’ or ‘Fail’
text pops up on the screen → press the [Back]-key to return to the previous
level.