Tools & Setup
© Radiodetection 2016 19 RD1500 Operation Manual
From here you can select the following:
Language
Pressing Language will cycle between available languages.
Units
Pressing Units will cycle between US Standard and Metric Units.
Volume
Scroll bar for adjusting the volume of clicks and beeps heard during operation. This can also be
changed by using the Swipe Down menu (Section 5.4) anytime the system is not collecting
data.
Brightness
Scroll bar for adjusting the brightness of the screen. This can also be changed by using the
Swipe Down menu (Section 3.4) anytime the system is not collecting data.
NOTE: Increasing the screen brightness also increases power consumption, thus reducing
battery life.
Auto-Hide Buttons
If this is set to ON, then in Line Scan mode, the buttons at the bottom of the screen disappear
shortly after data collection begins, effectively enlarging the area for data display. The buttons
will re-appear after a couple of seconds whenever the sensor stops moving forward, is in back-
up mode or any button is pressed on the keypad.
Anonymous Usage Statistics
This is set to OFF by default. When this is set to ON and the user is connected to a wireless
network, any system malfunctions will trigger an automatic notification to the manufacturer. This
is to help with gathering information about any system irregularities. As the name suggests, the
notification is completely anonymous and no personal information is sent.
6.2 System Settings
Press System Settings to enter the menu shown in Figure 6-3.
To Next Page
Loading...
Need help?
General
