Transferring Data to a PC
RD1500 Operation Manual 66 © Radiodetection 2016
Section 13 - Transferring Data to a PC
Screenshot images (and data, if you have the Enhanced system) can be exported to a PC via a
USB memory stick.
Figure 13-1: Insert a USB memory stick into the USB port on the Display Unit to export data.
Insert a USB drive into the USB port (Figure 13-1). Once the USB drive is recognized, a
message will appear telling you that a drive has been inserted and ask you if you wish to export
your data to it (Figure 13-2). Click Yes to begin the transfer
Figure 13-2: When a USB drive is connected to the Display Unit, a message opens asking if you
would like to export all your data to it. Select Yes to transfer immediately. If you select No, you
can export the data later by going to the Setup > File Management menu option.
To Next Page
Loading...
Need help?
General
