RADWAG MAX 60

- 16 -
Exit menu without saving changes:
Press Esc key.
Entering moisture analyzer’s main
menu:
Press Setup key to get access to user
menu and its parameters.
Exit menu without saving changes:
Press Esc key for two times.
Selecting a desired option in the
menu:
Press one of navigating keys (marked
with black coloured arrows) on
moisture analyzer’s overlay to move
the cursor (black triangle) up or down
in menu structure and set it against a
desired menu option.
Entering selected menu option / function:
Set the cursor (black triangle) against a desired function, and press SETUP key.
or
or
Changing parameter and function settings:
Use UP / DOWN navigating arrows to select accessible value
of a parameter or change setting of an active parameter (e.g.
name) when its value is flashing.
Use RIGHT / LEFT navigating arrows to select a character
while entering a parameter value (while its flashing).
Accepting changes in function / parameter settings:
Press PRINT/ENTER key to save settings of a modified
parameter/function.
Changing displayed data during drying process:
A moisture analyzer MAX series enables previewing five types