RADWAG WPW/E - Correction Mode; Initial Correction Value

24.8.6.1. Correction mode
Procedure:
• Enter <P7 WORK MODES> and then:
NONE
- Correction function disabled
CONSTAN
T
- Dosing refered to a constant nominal value of
correction
AUTO
- enabling automatic correction
Return to weighing:
See 11.3.
24.8.6.2. Initial correction value
In parameter <P7.4.6.2 START CORRECTION> a user can set a
mass value to be subtracted from or added to the nominal mass.
Procedure:
• Enter <P7 WORK MODES> and then:
- 114 -