RADWAG WPW/E - Texts in Non-Standard Printouts; Code Format

• After pressing , you will see a cursor. Software is ready
to accept your data.
Non-standard printout can comprise:
• Constant texts,
• Variables from different work modes (mass, date, thresholds etc.),
• Non-standard printout design can include max. 320 characters,
• Non-standard printout sent to a printer can include max. 640
characters,
• Up to 4 non-standard printouts can be designed.
Caution:
1. During designing non-standard printouts all special characters
like CRLF, tabulators etc. have to be added.
2. Examples of designing non-standard printouts can be found
in chapter 32.4.
17.6. Texts in non-standard printouts
17.6.1. Code format
% XXX - sending to a printer a variable XXX value
XXX YY - sending to a printer YY (declared) characters
of XXX variable value justified to the left.
Caution:
Every non-standard printout should be terminated with \0 character
- 56 -