RADWAG WPW/E

22.2. LED power setting
According to the requirements (e.g. intensity of external light) it is
possible to change the light flux from LEDs in the scale of 0% to 100%.
Procedure:
• Enter <P9.2 DIODES> according to 11.2. and then:
Return to weighing:
See 11.3.
22.3. Work modes for LEDs
In <P9.2 DIODES> users can chose a work mode for LEDs.
Procedure:
• Enter <P9.2 DIODES> according to 11.2. and then:
- 89 -