RADWAG WPW/E

14.1.4. Setting of RS 485 parameters
Procedure:
• Enter <P2.1 RS485> and press
,
• Using
go to <P2.1.2 DATA BITS> and press :
• The selected value confirm with
,
• Using
go to <P2.1.3 PARITY BITS> and press :
• The selected value confirm with
,
• Using go to <P2.1.4 STOP BITS> and press :
• The selected value confirm with
,
Return to weighing:
See 11.3.
- 36 -