24.9. Labelling
Labelling systems built on the basis of PUE C41 indicators are intended
to print labels in order to mark goods e.g. in a process of packing. They
can print standard labels to be sticked to single goods and also cumulative
and cumulative of cumulative labels for sticking to bulk packages and
containers.
Caution:
1. An example of designing and sending a label pattern to the scale
memory and setting some printer parameters for cooperation with
scales can be found in ch. 32.3 of this manual.
2. Example ready-to-implement label patterns are accessible to
download from our website: www.radwag.pl in the overlap
Products/Weighing Indcators/ PUE C41 Indicator
24.9.1. Triggering off „C LABEL”
Operators can use one of three ways to trigger off cumulative labels
depending on <P7.5.1 C LABEL> setting.
Procedure:
KEY
- printing c labels after pressing ,
COUNTER
-
printing c labels after exceeding N1,
MASS
-
printing c labels after exceeding M1.
- 118 -
To Next Page
Loading...
