RADWAG WPW/E - Coop Ation with an Additional Display; Selecting a Communication Port

• In parameters <P2 COM PORTS PARAMETERS> set the baud
rate (default 9600b/s).
• Enter the database of operators and then find and edit the
required operator. Find <CARD CODE> field:
• Approaching a card to the reader results in displaying the card
number in the <CARD CODE> field,
• Press
to confirm,
• Return to weighing – chapter 11.3.
15.5. Cooperation with an additional display
15.5.1. Selecting a communication port
Additional displays can be connected to:
• RS 232 (1)
• RS 232 (2)
• RS 485
Procedure:
• Enter < P3.5 ADDITIONAL DISPLAY > according to 11.2. and then:
- 48 -