RADWAG WPW/E

24.9.5. Setting „N2” counter
Procedure:
• Enter <P7.4.5 N2> according to 11.2,
• Inscribe N2 value to be exceeded for triggering cc label,
• Confirm it with
.
Return to weighing:
See 11.3.
24.9.6. Setting „M2” mass value
Procedure:
• Enter <P7.4.6 M1> according to 11.2.,
• Inscribe M2 value to be exceeded for triggering cc label,
• Confirm it with
.
Powrót do ważenia:
Patrz – punkt 11.3 - powrót do ważenia.
- 121 -