RADWAG WPW/E - Setting of the Number of CC Labels to Print; Choosing the Labelling Work Mode

Return to weighing:
See ch. 11.3 - return to weighing
24.9.10. Setting of the number of cc labels to print
In the parameter <P7.5.10 NO OF LAB. CC> define the amount of total
sum labels to print. They are printed on connected printer.
Procedure:
• Enter parameters group <P7 WORK MODES> following
point 11.2. of the manual and then:
• Using the keyboard enter the amount of total sum labels
and confirm it with the key
.
Return to weighing:
See ch. 11.3
24.9.11. Choosing the labelling work mode
- 124 -