22.4. Automatic power down
Changes can be made in <P9.3 POWER SAVE>. When the POWER
SAVE function is enabled the device switches off after 5 min. Provided
no changes on the pan appeared (no changes on the display).
Operation
Function setting
Mains Accumulator
POWER SAVE = NO Disabled Disabled
POWER SAVE = YES Enabled Enabled
POWER SAVE = AUTO * Disabled Enabled
* power save mode for the internal power supply.
Procedure:
• Enter <P9 OTHER> according to 11.2. and then:
Return to weighing:
See 11.3.
- 91 -
To Next Page
Loading...
Need help?
General
