RADWAG WPW/E

14.1.3. RS 232 parameters
Procedure:
• Enter <P2.2 RS232 (1)> and press ,
• Using
scroll to <P2.2.2 DATA BITS> and press :
• The selected value confirm with
,
• Using
go to <P2.2.3 PARITY BIT> and press :
• The selected value confirm with
,
• Using
go to <P2.2.4 STOP BITS> and press :
• The selected value confirm with <ENTER>,
Caution:
Search chapter 32.2.2 of this manual to find details on connecting
the scale with EDYTOR WPW via RS232.
Return to weighing:
See 11.3.
- 35 -