Return to weighing:
See 11.3.
15.1.5.2. Buffer for weighings
Users can declare the quantity of performed measurements to be saved
in the internal buffer in the scale in case of operating OFF-LINE (no
transmission to „E2R SYSTEM”). After reconnecting with „E2R SYSTEM”
all measurements from the internal buffer will be sent to the database
of the computer program.
Procedure:
• Enter < P3.1 COMPUTER > according to 11.2. and then:
• Type on the scale keyboard the required buffer length and confirm
by pressing button
.
Caution:
The buffer equal to 0 results in saving all weighings in the database
in case of operating OFF-LINE.
- 42 -
To Next Page
Loading...
Need help?
General
