RADWAG WPW/E - Setting N1 Counter; Setting M1 Mass Value

24.9.3. Setting „N1” counter
Procedure:
• Enter <P7.4.3 N1> according to 11.2.
• Inscribe the N1 value to be exceeded for triggering c label,
• Confirm it with
.
Return to weighing:
See 11.3.
24.9.4. Setting „M1” mass value
Procedure:
• Enter <P7.4.3 M1> according to 11.2.,
• Inscribe M1 value to be exceeded for triggering c label,
• Confirm it with
.
Return to weighing:
See 11.3.
- 120 -