Raisecom ISCOM5508 - Table 2-4 Parameters of the Console Interface; Table 2-5 Parameters of the SNMP Interface; Table 2-6 Parameters of the GE Interface Based on 10;100;1000 BASE-T Standard

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
9
Table 2-4 Parameters of the Console interface
Parameter
Description
Connector
RJ45
Working mode
Duplex UART
Electrical features
RS-232
Baud rate
9600 Baud
Data bit
8
Parity check
None
Stop bit
1
Flow control
None
Cable specifications
8-core shielded cable
Table 2-5 lists parameters of the SNMP interface.
Table 2-5 Parameters of the SNMP interface
Parameter
Description
Connector
RJ45
Interface rate
10/100BASE-T auto-negotiation
Wiring
Support straight-through and crossover cable self-adaption in host
mode
Compliant standard
IEEE 802.3
Table 2-6 lists parameters of the GE interface.
Table 2-6 Parameters of the GE interface based on 10/100/1000BASE-T standard
Parameter
Description
Connector
RJ45
Working mode

10/100/1000 Mbit/s auto-negotiation

Full duplex and half duplex auto-negotiation
Cable specifications

When the working mode is 10 Mbit/s or 100 Mbit/s, we
recommend using the Cat 5 UTP cable.

When the working mode is 1000 Mbit/s, we recommend
using Cat 5 better STP cable.
Compliant standard
IEEE 802.3
Supported network protocol
IP