Raisecom
ISCOM5508 (B) Hardware Description
Raisecom Technology Co., Ltd.
The letter D indicates the length, which is customized. For example, if the
customer requires 2-meter cables, they are named American standard-3
pin-10A/250V-2m/RoHS.
3.6 Grounding cable
Connecting the grounding cable properly is an important guarantee to lightning
protection, anti-electric shock, and anti-interference. The ISCOM5508 must be
connected to the grounding cable correctly during installation, which helps avoid
personal injury and equipment damage.
3.6.1 Introduction
The grounding cable is used to ground the ISCOM5508.
3.6.2 Appearance
The grounding cable is composed of two grounding terminals and the coaxial cable. In
general, grounding terminals are OT bare-pressure terminals; and the coaxial cable is a
yellow/green copper soft flame-retardant conducting wire.
Figure 3-12 and Figure 3-13 show the grounding cable and OT terminal respectively.
Figure 3-12 Grounding cable
Stripped end (connected to the OT terminal)
To Next Page
Loading...
Need help?
General
