Ramtech WES3 - Base Station Operation

Page 33 WES
3
Installation and Operations Manual V2.0 Ramtech Electronics Limited 2020
Advanced
One or more Base Stations can be added to a basic system to provide
additional system monitoring information. Base Stations can display
detailsaboutwhichunitshaveraisedrealarms,anyunitswithcurrent
fault warnings, and historical event logs. The Base Station also allows
anauthorisedusertocancelactivemedicalalerts,andsilenceare
alarm using the access code.
Optional GSM functionality allows up to six users to receive text
messagesintheeventofareorothersystemwarningsoccurring,
and can also connect the WES
3
network to a live WES REACT
account.
To conserve battery power, the LCD display and backlight turn off after
a short period of inactivity. Pressing any of the navigation buttons will
activatethedisplay.Iftherearenocurrentwarningsorrealarms
across the system, the base station will display the home screen which
shows the site name and the date and time.
Pressing enter ( ) goes to the main menu to allow settings to be
changed or logs to be viewed.
DEFAULT SITE
23/06/17 2 2 : 0 3
02 Minute Delay On
Prealarm mode - On
Base Station Operation
Menu overview
Main Menu
System Logs
Settings
Settings Menu*
Unit Numbering
System Test
System Poll
Communications
Date and Time
Change Access Code
Backlight
Mobile Base
Change Language
Communications**
Change Site Name
User Phone Details
GSM Status
SIM Card Info
Network Scan
System Log Menu
Alarms
Cancelled in Delay
System Tests
Medical Assist
External Tampers
Internal Tampers
DT Head Tampers
Low Signals
Low Batteries
Flat Batteries
Latched Units
Unit Removed
Unit Missing
Unexpected Unit
Clear All Logs*
Change Language
English
Deutsche
Français
Español
Italiano
Svenska
User Phone Details
Edit User Name
Edit Phone No
SMSNotications
Test Phone No
Delete User
* Access Code Required
** Only for GSM Base Stations