R&S FSH series User Manual

49
E-02
Setting the system beeper volume
 Press the SETUP key.
 Press the INSTRUMENT SETUP softkey.
The R&S FSH opens a list of general settings.
 Select SYSTEM BEEPER VOLUME below the
heading AUDIO with the rotary knob or the
cursor keys (∧ or ∨).
 Confi rm with ENTER.
An input fi eld opens in which the current system
beeper volume is displayed in percent.
 Enter the desired volume value with the rotary
knob or the cursor keys in 10 % steps or enter
the value directly via the numeric keys.
 Confi rm with ENTER.
The input range lies between 0 % and 100 %.
GalaxyE_v1-10_3.indd 49GalaxyE_v1-10_3.indd 49 08.04.2009 15:21:4308.04.2009 15:21:43

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)