R&S FSH series User Manual

66
PD 1309.6269.62-02
In networks with a DHCP server, the Dynamic
Host Confi guration Protocol (DHCP) permits
automatic allocation of the network confi guration
to the R&S FSH connected via LAN cable. For this
purpose, DHCP must be active on the R&S FSH.
DHCP is switched on by default on the R&S FSH. If
the setting has been altered, proceed as follows:
 Press the SETUP key.
 Press the INSTRUMENT SETUP softkey.
The R&S FSH opens a list with the general settings.
 Select the DHCP MODE menu item below the
heading LAN PORT with the rotary knob or the
cursor keys (∧ or ∨).
 Confi rm with ENTER.
A selection list opens.
 Select ON with the rotary knob or the cursor
keys (∧ or ∨).
 Confi rm with ENTER.
DHCP is now active.
GalaxyE_v1-10_3.indd 66GalaxyE_v1-10_3.indd 66 08.04.2009 15:21:4508.04.2009 15:21:45

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)