R&S FSH series User Manual

89
E-02
For a highly accurate measurement, enter the
frequency of the signal under test.
 Press the FREQ softkey.
 Using the numeric keys, enter the frequency
you want and confi rm the entry with the ENTER
key or by pressing the FREQ softkey again.
The R&S FSH transfers the new frequency to the
power sensor which then corrects the measured
power readings.
GalaxyE_v1-10_3.indd 89GalaxyE_v1-10_3.indd 89 08.04.2009 15:21:5008.04.2009 15:21:50

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)