Rational CombiMaster Plus Original Installation Instructions

4 | Transport
80.06.083_iCombiPro-iCombiClassic_IM_en-US 21 / 100
NOTE
Transport with transport aid without protection
Transport the unit on the pallet for as long as possible. Do not transport the
unit with a transport aid or similar transport equipment without protection.
Use a wooden board for protection, for example.
x
y
Required door width with transport pallet
Unit size XS 6 half
size
6 full
size
10 half
size
10 full
size
20 half
size
20 full
size
x (mm) 880 945 1150 945 1150 989 1194
x (inch) 34 5/8 37 1/4 45 1/4 37 1/4 45 1/4 38 7/8 47
y (mm) 930 935 1170 935 1170 969 1174
Y (inch) 36 5/8 36 3/4 46 1/8 36 3/4 46 1/8 38 1/8 46 1/4
Transport tabletop units with transport pallet
a The packaging material is removed.
a The unit is on the transport pallet.
a The unit rests on the unit base frame.
1. Transport the unit to the installation site with the transport pallet.
2. Lift the unit off the transport pallet on the lifting points and set it down on
the designated installation surface.
>> The unit is on the designated installation surface and is ready for setup and
installation.
Transport floor units with transport pallet
Floor units are delivered on a special, divisible (2 piece) transport pallet.

Rational CombiMaster Plus Specifications

General

Model	CombiMaster Plus
Manufacturer	Rational
Category	Oven
Cooking modes	Steam, Convection, Combination
Temperature range	30°C to 300°C
Cleaning system	Manual cleaning
Power Consumption	Varies by model
Steam Generator Output	Varies by model
Weight	Varies by model
Dimensions	Varies by model
Control type	Manual
Capacity	10-20 levels (depending on model)