4 | Transport
24 / 100 80.06.083_iCombiPro-iCombiClassic_IM_en-US
> The right transport aid must rest on the right foot of the unit.
4. Lift the floor unit using the lift truck.
5. Transport the unit onto the designated installation surface.
>> The unit is set down on the designated installation surface and is ready for
setup.
4.4 Transport with lifting aid
Only transport the unit sizes 6 half size to 10 full size with the lifting aid.
n
Only original service parts may be used.
n
Check the lifting aid before use. Do not use the lifting aid if it is worn or
damaged.
n
Use the lifting aid as described. Changing, expanding or alternative use of
the lifting aid is not permitted.
The lifting aid may only be lifted by hand. It must not be used with other
lifting equipment.
CAUTION
Risk of crushing during setup
Fingers, hands and feet may be crushed under the unit.
n
Wear suitable protective clothing during setup.
n
Only lift the unit via the designated lifting points.
CAUTION
Risk of crushing and injury due to incorrect lifting with lifting aid
Hands, fingers or feet may be crushed.