1 | Introduction
6 / 100 80.06.083_iCombiPro-iCombiClassic_IM_en-US
1 Introduction
1.1 Information about this manual
This document is an up-to-date version of the installation manual at the time
of publication. Please note the respective version and date.
This document is part of the unit. Read this manual before carrying out the in-
stallation. The manual enables safe handling of the unit and correct installation.
The figures in this manual are examples only and may differ from the unit.
This manual is valid for the following units:
n
LM1: iCombi Pro
n
LM2: iCombi Classic
n
LM2: CombiMaster Plus XS
Storage
Store the installation manual and operating manual with the unit. For service
work, the installation manual must be accessible to specialist personnel autho-
rized by the manufacturer at all times.
Pass on
Pass this installation manual on to the owner of the unit.
Circuit diagram
The starter kit includes a circuit diagram of the unit. If the circuit diagram is
lost, it can be accessed by an Authorized RATIONAL technician, found in the
service parts catalog and the TechAssistant app. The TechAssistant app is
available in the App Store and on Google Play.
Explanation of symbols
a A prerequisite lists all conditions that must be met before an action can be
taken.
1. An action step describes an action to be carried out by the reader.
> Shows a successful interim result.
2. Further action step.
>> The results shows the result of the action.
1.2 Target audience
n
This document is intended for trained technicians who have been certified
by the manufacturer after attending training courses and receiving safety
instructions.
n
The installation, as well as inspection, maintenance and repair work, may
only be carried out by trained technicians.
n
It is advisable to only have inspection, maintenance and repair work car-
ried out by technicians authorized by the manufacturer.
To Next Page
Loading...
Need help?
General
