Rauch AXIS-M 20.2 EMC - Page 113

Commissioning
93
A
AXIS
AXIS 20.1
AXIS 20.2
11. Retighten the lubricating
nipples.
Figure 5: Tighten lubricating nipples
12. Push the drive shaft guard
with hose clamp over the
drive shaft and loosely at-
tach it to the extension hous-
ing of the transmission (do
not tighten).
13. Turn the universal drive
shaft guard to the locking
position.
Figure 6: Put the universal drive shaft
guard back on
14. Tighten the locking screw.
15. Tighten the hose clamp.
Figure 7: Secure the universal drive shaft
guard
K
D
R
C
Q
W
EMC