General commissioning (all machine types) 8
68
Example of field spreading during late fertilising:
Figure 8.16: Field spreading during late fertilising
During field spreading in late fertilising mode, a symmetrical spreading pattern is
produced. If the spreader is correctly set (see information in the fertiliser chart),
the fertiliser is evenly spread over the field.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 0/6 (A = 0 cm, B = 6 cm)
Drop point: 6.5
Metering slide adjustment: 90
Spreading disc type: S4
PTO speed: 540rpm
To Next Page
Loading...
