5-36
hsb
2
Plus Series Fishfinders
Transferring
Waypoints and
Routes
• You can transfer the waypoint and route lists from one chartplotter to
another across an
hsb
2
link using SEND WPT LIST ON HSB and RECIEIVE WPTS
FROM HSB.
CAUTION:
The functions LOAD USER CARD, SEND WPT LIST ON HSB and RECIEIVE WPTS
FROM HSB replaces the existing waypoint and route lists with the
transferred lists.
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARKS followed by the LOAD/SAVE USER CARD soft key.
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or
LOAD WPT/RTE DATA FROM CARD
soft key; an appropriate warning and Yes/No soft keys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
MARKS
D5594-1
USER CARD PRESENT
WARNING
SAVING DATA TO THE USER
CARD WILL ERASE ALL EXISTING
WAYPOINT AND ROUTE DATA
ON THE CARD.
USER CARD MENU
ARE YOU SURE ?
YES NO
To Next Page
Loading...
