COG indicator
Visual identification of your course over the ground. The COG indicator is
available on the navigation dial when COG data is available.
Destination waypoint indicator
Visual identification of the course to your current destination. The Destination
waypoint indicator is available during active navigation (i.
e.: Navigating to a
waypoint, performing a goto or following a route).
True wind angle indicator
Visual identification of the true wind angle. The indicator is available on the
sailing dial when wind data is available and the dial is set to TWS.
Apparent wind angle indicator
Visual identification of the apparent wind angle. The indicator is available on
the sailing dial when wind data is available and the dial is set to AWS.
Switching between TWS and AWS sailing dials
The sailing dial can be configured to display either True wind data or Apparent wind data.
From the Dashboard app with the sailing page displayed:
1. Press the Menu button.
2. Select
Customize page.
The Dashboard app page will enter edit mode with the sailing dial highlighted.
3. Press the
OK button.
4. Select
Edit from the pop-over menu.
5. Select
Wind.
6. Select
TWS to display the True wind dial, or select AWS to display the Apparent wind dial.
7. Press the
Back button to exit edit mode.
9.3 Rolling road
The rolling road dashboard page provides a graphical representation of your vessel’s course and
indicates if your vessel has deviated from its course.
With your display receiving accurate heading and position data, you can use the rolling road page to
monitor your course and accurately steer to a target destination.
120
To Next Page
Loading...
