2. Select Check online from the pop-over menu.
If you do not have an active internet connection then you will be requested to create one.
3. To set up a Wi-Fi connection select Wi-Fi settings and connect to the required Wi-Fi access
point/hotspot.
4. Select
Start.
A list of available products is displayed. The list will include your display and products that are
connected to the SeaTalkng ® backbone.
Software update list example
5. Select each device that you want to update.
If a notification is displayed asking if you want to reinstall the current software version, unless
you are experiencing problems with the product select
No, otherwise select Yes and the current
version of software will be reinstalled.
6. When all relevant products have been chosen, select Update selected to commence the
software update process.
7. Wait for the update process to complete.
8. Select
Exit.
Note:
Your products may reboot automatically as part of the update process.
4.6 User data import and export
User data (i.e.: Waypoint, Routes and Tracks) can be imported and exported from your display. User
data is saved in the common .gpx file format.
The Import/export menu can be accessed from the homescreen settings menu
Homescreen >
Settings > Import/export.
Saving user data
You can backup your user data (waypoints, routes and tracks) to a MicroSD card.
1. Insert a memory card into your display’s card reader.
Set up
37
To Next Page
Loading...
