6.1 Waypoints
Waypoints are used to mark specific locations or points of interest.
Waypoints can be used in the Chart and Fishfinder apps. Your display can store up to 5,000
waypoints, which can be sorted in up to 200 waypoint groups.
In the Chart app you can navigate to a waypoint by selecting
Goto from the Waypoint context menu.
Waypoints can be imported and exported from the display. For more information, refer to:
p.70 — User data import and export
Placing a waypoint (Quick method)
To place a waypoint at a specific location in the Chart or Fishfinder apps, follow the steps below.
1. Use the
Directional pad to place the cursor over the desired location and press the Waypoint
button.
The app will be in cursor mode and the waypoint saved notification is displayed.
Note:
If there is no interaction with the notification within 5 seconds the notification will automatically
close, saving the waypoint with the default values.
2. If required, select a recent waypoint symbol that you want to assign to the waypoint.
3. Press the
OK button.
The waypoint will be saved with the chosen symbol, in the waypoint group shown against
Group:.
Placing a waypoint at your vessel's location
To place a waypoint at your vessel’s locations follow the steps below.
Note:
For a waypoint to be placed at your vessel’s location your display must have a GPS/GNSS position
fix.
1. If, required press the Back button to enter Motion mode in the Chart app, or Scrolling mode
in the Fishfinder app.
2. Press the
Waypoint button.
The app will be in cursor mode and the waypoint saved notification is displayed.
Note:
If there is no interaction with the notification within 5 seconds the notification will automatically
close, saving the waypoint with the default values.
3. If required, select the a recent waypoint symbol that you want to assign to the waypoint.
4. Press the
OK button.
The waypoint will be saved with the chosen symbol, in the waypoint group shown against
Group:.
58
To Next Page
Loading...
