Transmitting
If your radar scanner is connected, powered up and transmitting then the radar image is displayed
and echoes returns are displayed onscreen.
Putting the radar into standby
With your selected radar displayed onscreen:
1. Select
Transmit from the main menu.
The radar scanner will stop transmitting and is put into standby mode.
Powering down your radar scanner
With your radar scanner in standby mode:
1. Select the
Off icon.
2. Select
Yes to confirm power down.
The radar scanner will still consume a small amount of power whilst it is powered off, this is to
ensure the radar can be powered back up quickly.
10.3 Radar app overview
Radio Detection and Ranging (RADAR) is used on the water to detect the presence of objects at
a distance, and if they are moving, detect their speed. Radar works by transmitting radio pulses,
then detecting reflections of these pulses (echoes) from objects in the area. The Radar app is a
navigation aid, used to enhance situational awareness by displaying a visualization of the echoes
received by a connected radar scanner.
The Radar app can be displayed in Fullscreen and splitscreen app pages.
Radar app
133
To Next Page
Loading...
Need help?
General
