Raymarine Lighthouse Sport 3.10 Series - Customizing Homescreen App Pages

Radial
The radial app page is a fullscreen page that provides an instantaneous
(real-time), radial view of the water beneath the transducer. The radial view
shows the returns from the sonar signal (using the same color coding as the
traditional scrolling view), organised in a circular formation. This view enables
you to quickly identify what is currently passing under your transducer (e.g.
bottom structure or target etc), in each segment of the depth range.
A-Scope
The A-scope app page is a fullscreen page that provides an instantaneous
(real-time) view of the water beneath the transducer. This allows you to see
what is currently passing under your transducer (e.g. bottom structure or target
etc), rather than the historical display provided by the traditional, scrolling,
2D view.
Assigning app pages to Quicklaunch buttons
App pages assigned to the Quicklaunch buttons are identified using the associated Quicklaunch
button number in the top right corner of the app page icon.
You can change which app page is assigned to the Quicklaunch buttons by following the steps below:
1. Using the
Directional pad, highlight the app page icon that you want to assign to a Quicklaunch
button.
2. Press and hold the relevant
Quicklaunch button until the ‘Quicklaunch button configured’
message is displayed.
The app page icon is updated to show the associated
Quicklaunch button number in the top
right corner of the icon.
3. R
epeat steps 1 and 2 for the remaining
Quicklaunch buttons, if required.
5.2 Customizing app pages
You can customize the homescreen app pages.
1. Highlight the app page icon you want to change.
2. Press and hold the
OK button.
The pop-over menu is displayed.
3. Select the relevant option:
•
Customize — select customize to change the app page to one of the available configurations.
•
Delete — select delete to delete the app page icon from the homescreen.
• Rename — select rename to change the name of the app page icon using the onscreen
keyboard.
•
Assign as Quicklaunch 1/2/3 — select to assign the app page to a Quicklaunch button.
Homescreen
47