4.2 Getting started
Startup wizard
The first time the display is powered up, or after a
Factory reset the startup wizard is displayed.
The startup wizard guides you through the configuration of important display settings.
The settings included in the startup wizard are listed below:
• User interface language — for a list of available user interface languages see:
User Interface languages
• Activity — activity selection determines default settings and homescreen app page icons:
– Fishing (inland)
– Fishing (coastal)
– Fishing (ice)
– Motor cruising
– Sailing
– P
addle
– Other
• *Boat details — boat details include important safety related settings:
Note: * Boat details are skipped when the Fishing (ice) activity is selected. If required, boat
details can be configured manually from the
Boat details settings tab.
– Safety clearances
– Number of engines
– Number of tank
s
– Number of batteries
– Sonar transducer selection
– Radar selection
Important
– Ensure you select the correct
Sonar transducer.
– Ensure that the
Radar installed option is enabled if you intend to connect a Quantum™
radar scanner to the display.
Changing activity type
To change the selected activity type after the startup wizard has finished a factory reset must be
performed.
1. Backup your user data before performing a factory reset..
For details on exporting you user data refer to: p.37 — Saving user data
2. Perform a factory reset.
For instructions on performing a factory reset refer to:
p.30 — Performing a settings or factory reset
3. follow the startup wizard instructions, selecting your new activity.
4. Import your user data.
For instructions on importing your user data refer to: p.30 — Importing user data
28
To Next Page
Loading...
