When an AIS target is highlighted the LiveView pane will pan and zoom to show the AIS target.
When an AIS target is selected the AIS target details page is displayed.
AIS Settings
Settings related to AIS can be accessed from the Target Settings menu:
Menu > AIS Targets >
Target Settings.
AIS: Enables and disables display of AIS targets in the Chart
app.
Note:
When disabled AIS targets and details are still available
in the AIS targets list.
Silent mode (don’t transmit my
position:
Your AIS hardware will not transmit any data when in silent
mode. In Silent mode AIS data can still be received from
other vessels.
Hide static targets:
Targets travelling under 2 knots will be hidden, unless the
target is dangerous or becomes dangerous.
AIS vectors: Enables and disables display of vectors on AIS targets.
Vectors period:
Determines the predicted position of the target (and
therefore the length of the vector).
Note:
The Vectors period settings also applies to your vessel’s
COG vector.
Reference mode:
Determines whether vectors are shown in true or relative
mode.
82
To Next Page
Loading...
