• Press to open the assigned app page.
• Press and hold to assign the quick launch button to the app page currently highlighted on
the Homescreen.
10.
Power
• Power on — Press and hold until the display beeps (approximately 2 seconds).
• Shortcuts menu — Press once to open the shortcuts menu.
• Power off — Press and hold until the display turns off (approximately 5 seconds).
• Power off — Press to open the Shortcuts menu and then select
Power down display.
Switching on and off at the breaker
When powered off the display will still consume a small amount of power.
If you wish to ensure that the display is not consuming any power then it must be switched off at the
breaker or have the power cable unplugged.
When the breaker is switched back on or the power cable is reconnected the display will remain
powered off, until switched back on using the
Power button.
Switching active app
On app pages that contain more than 1 app you can select which app has the current focus (i.e.:
which app responds to your control).
Press and hold the
Menu button to move focus to the next app.
In addition to pressing and holding on the Menu button you can also switch app focus from the
app menu. With a multi app page displayed:
1. Press the
Menu button.
2. Highlight the
Switch to option.
3. In app pages with more than 2 apps, use the
Right and Left buttons to highlight the app you
want to make active.
4. Press the OK button.
5. Press the
Back button to close the menu.
Set up
27
To Next Page
Loading...
