AIS dangerous targets
If AIS targets enter a dangerous target state they can trigger an alarm on your display. AIS targets
are considered to be dangerous if they will pass within a specified safe distance from your vessel
within a specified time interval.
The dangerous target alarm can be enabled and disabled from the alarms menu:
Homescreen >
Settings > Alarms > Dangerous AIS targets .
The dangerous target alarm can be configured from the Dangerous target page, accessed from the
alarms menu:
Homescreen > Settings > Alarms > Dangerous AIS targets > Configure.
To set up the AIS dangerous target alarm, first adjust the Safe distance to the desired value and then
select a
Time to reach safe distance. The alarm will be triggered if a tracked target will reach the
specified Safe distance from your vessel within the time period selected.
You can display a Safe distance ring around your vessel in the Chart app and Radar app by enabling
Show safe distance.
AIS vectors
Vectors can be displayed for AIS targets.
AIS target vectors settings can be accessed from the
Target Settings tab: Menu > AIS Targets >
Target Settings.
The length of the vector indicates the predicted position of the target after the time interval specified
in
Vectors period has passed. Adjusting the Vectors period option will adjust the length of the vector.
AIS vectors can be enabled and disabled using the
AIS vectors toggle switch.
Target vectors can be enabled and disabled for individual targets: Press and hold on an AIS target to
display the context menu, and then select Vector.
The vectors can be set to True or Relative.
Radar app
137
To Next Page
Loading...
