1. Select the TIDES mode icon from the menu.
2. Select
Animate tides from the menu.
3. Use the
OK button to start and stop playback.
4. Use the
Left button to skip forwards through the animation.
5. Use the
Right button to skip forwards through the animation.
Note:
Pressing and releasing the Left or Right buttons will skip the animation in 15 minute intervals.
Pressing and holing the
Left or Right buttons will continue to skip the animation until the button is
released.
Selecting a date for tide animations
You can select a specific date for tide and current animations.
1. Select Select date from the menu.
2. Use the
Left and Right buttons to select the month, day or year.
3. Use the
Up and Down buttons to highlight the Up or Down arrows
4. Use the
OK button to change the highlighted value.
5. Select
Save.
Tide station information
Depending on your cartography, Tide station information may be available.
Tide station symbol
The location of Tide stations is marked on the chart using a diamond-shaped
symbol with a ‘T’ in the middle.
• The symbol is colored Red when using Navionics cartography.
• The symbol is colored Black when using LightHouse Charts or C-Map cartography.
Dynamic tide graphic
Using Navionics cartography, when the Tides is enabled (
Menu > Settings > Set-up > Tides) the tide
symbol is replaced with a dynamic tide height graphic:
92
To Next Page
Loading...
