• add an existing waypoint to the route by selecting Add waypoint
• change route options, such as route name, route color, route hide or delete the route by selecting
the relevant option from the
Route options pop-over menu.
Note: Route names can be any combination of letters, numbers, symbols and special
characters and can include up to 16 characters. Route names must be unique.
By selecting a waypoint from the route plan you can use the pop-over menu to:
• change the position of the waypoint in the route by selecting Move up or Move down.
• remove the waypoint from the route by selecting Remove from route.
• delete the waypoint by selecting Delete waypoint.
• edit the waypoint details by selecting Edit waypoint.
• start to follow the route from the selected waypoints by selecting Follow from here.
6.3 Tracks
Tracks are used to record where you have been. Tracks are made up of track points that are created
at regular time or distance intervals.
You can store up to 15 tracks on your display, each track can contain up to 10,000 points.
Tracks can be converted into routes so that they can be followed.
Tracks can be imported and exported from the display. For more information, refer to:
p.70 — User data import and export
Creating a track
You can record your vessel’s voyage using Tracks. Once a Track is saved it can be converted to a
route so that the same passage may be followed again at a later date.
With the Chart app displayed:
1. If required, press the
Back button to enter motion mode.
2. Press the OK button.
The boat details pop-over menu is displayed.
3. Select
Start track.
Your vessel’s voyage will now be recorded.
68
To Next Page
Loading...
