Raymarine Lighthouse Sport 3.10 Series - Page 63

3. Select the Group that you want to delete.
4. Select
Delete selected.
5. Select
Yes .
The waypoint group and waypoints that are assigned to that group will be deleted.
Creating a waypoint based on coordinates
You can manually create a waypoint based on the coordinates of the location where you want
the waypoint placed.
From the homescreen:
1. Select
Waypoints.
2. Select
New WPT.
3. Enter the relevant details in the available fields.
4. Choose a waypoint symbol.
5. Enter the position coordinates where you want the waypoint placed by selecting on the
Position:
field and using the onscreen keypad to enter the latitude and longitude for the location where
you want the waypoint placed..
By default your vessel’s coordinates will be displayed.
6. Select Save to return to the waypoint details.
7. Press the
Back button to return to the Waypoint groups menu.
Finding nearby waypoints
You can find waypoints that are within the LiveView pane by following the steps below.
The waypoint find feature will find and create a list of all waypoints located within the area covered
by the LiveView pane.
From the homescreen:
1. Select
Waypoints.
2. To find waypoints that are located within the area covered by the LiveView pane, select
Find
waypoints in this area, otherwise
3. Highlight a waypoint in the waypoint list and select
Find waypoints in this area.
A list of all the found waypoints will be shown in the waypoint list.
P
anning the LiveView area
You can change the chart area displayed in the LiveView.
1. Open the
Waypoints menu.
The waypoints menu can be accessed from the Homescreen (Homescreen > Waypoints) and
from the Chart app (
Chart app > Menu > Waypoints).
2. Press the Right button.
Find waypoints in this area will be highlighted.
3. Press the
Up button.
Focus will move to the LiveView pane.
4. Press the OK button.
The LiveView pane will enter panning mode.
5. Use the
Directional pad to pan the chart area to the desired location.
6. Press the
Back button.
7. Select
Find waypoints in this area.
Showing and hiding waypoint groups
When the waypoint menu is accessed from the Chart app you can hide and show waypoints.
From the Chart app:
1. Press the Menu button.
2. Select
Waypoints.
3. Select
Show/hide.
The list of waypoint groups is displayed, all waypoint groups are selected (ticked) by default.
Waypoints, Routes and Tracks
63