Important:
Before following a route, you must ensure that each waypoint and leg of your route is safe for
your vessel to navigate.
1. Select the location for the first waypoint.
2. Select
Build route from the context menu.
3. Select the location for the second waypoint.
The 2 waypoints will be joined by a line, creating the first leg of your route.
4. Select the location for the subsequent waypoints, required to complete your route.
5. When your route is complete press and hold the
OK button and then select Finish build from the
context menu.
The finish route build notification is displayed.
6. From the notification you can either:
• Select
Follow to immediately start following the route, or
• Select
Follow in reverse to follow the route in reverse waypoint order, or
• Select Route plan to view the route plan menu, or
• Select
Exit to return to the Chart app.
Note:
You can press the Back button at anytime during route building to remove the last waypoint
you placed.
Use Autorouting during route creation
Whilst building a route you can use Autorouting to automatically add a route leg to a route you have
already started to create. The Autorouting features require compatible cartography.
1. Press and hold anywhere on screen and select either
Autoroute to wpt or Autoroute to here.
Selecting Autoroute to wpt will allow you to select a waypoint from your Waypoints list to include
in your route, selecting
Autoroute to here will create a route leg to the cursor’s current position.
Once an Autoroute leg has been added you can select Finish route build or add further manual or
autoroute route legs.
Waypoints, Routes and Tracks
65
To Next Page
Loading...
