Need help?Do you have a question about the RDS loadmaster 9000i and is the answer not in the manual?
General| Brand | RDS |
|---|---|
| Model | loadmaster 9000i |
| Category | Accessories |
| Language | English |
Explains the purpose and approvals of the Loadmaster 9000i DMM system.
Details calibration procedures for approved and non-approved modes.
Identifies and describes the components of the instrument's head unit.
Outlines the types of certifications and presets available for the system.
Steps for powering on the instrument and initial checks.
Procedure for selecting between approved (NAWI/AWI) and non-approved modes.
Explains the "CHECK ZERO" screen and routine.
How to perform zeroing for dynamic weighing in AWI mode.
Procedure for zeroing in NAWI mode or static weighing in AWI mode.
Lists and explains common error indicators like slope, sensor faults, etc.
Instructions for entering the desired target weight for loading.
Describes the process of dynamic weighing and its features.
Explains the static weighing process using auto-kickout.
How to select reference stores for data logging.
Lists and explains common error indicators like slope, sensor faults, etc.
Alerts when the maximum weight limit is exceeded.
Guides through setting up reference stores, hardware, and data cards.
Lists essential files needed on the data card for store functions.
How to add and edit store data using MS Excel.
Guide to accessing and interpreting load data files from the card.
To Next Page
