5 - SYSTEM SETTINGS
33
7. Loadmaster Configuration file (LMSETUP.CSV)
This is the main configuration file for the Loadmaster. It stores the following information:
?? (LINE 1) Loadmaster type as show on the front screen.
?? (LINE 2) 8 ID lines (e.g. for Name, address & Tel No of the company).
?? (LINE 3,4,5) 3 icon bitmaps in Decimal format used for the first 3 Reference fields.
?? (LINE 6) A "CE 1137" bitmap in Decimal format for allocation with relevant approved products.
?? (LINE 7) A "Start Logo". This is the bitmap in Decimal format shown on the Start up screen.
?? (LINE 8) A "Print Logo". This is the bitmap in Decimal format shown at the top of each print.
A typical file is shown below:
OE,LM9000,RDS Loadmaster 9000
ID,Company Name,ID 2,Road,Town,Region,Post Code,Tel,Fax
Icon1,8,8,24,24,0,102,102,0,219,219
Icon2,8,7,24,24,0,126,255,189,189
Icon3,8,7,253,129,189,129,189,129,191
Ce1137,21,24,15,0,120,63,1,248,120,3,192,112,3,128,224,7,0,224,7,0,224,7,240,224,7
StartLogo,65,56,0,3,255,255,255,255,254,0,0,0,7,255,255,255,255,255,0,0,0,15,255,255
PrintLogo,149,51,63,255,255,255,255,224,0,0,0,0,0,0,0,0,0,0,0,0,0,127,255,255,255,255
END
7.1 Editing the Header information on the Printout
Open the LMSETUP.CSV file in MS Excel and edit Line 2 (ID) of the file as required.
e.g ID,Company Name,ID 2,Road,Town,Region,Post Code,Tel,Fax
There are 8 ID lines. Each line of text is separated by a comma.
To Next Page
Loading...
