1 - OVERVIEW
8
1.7 Loading Attachments
The system can be calibrated for up to 8 different attachments.
1.8 Menu keys
Nine menu keys adjacent to the LCD display access all instrument
functions.
The four menu keys to the right of the screen access the primary screen
pages (those viewed during normal operation). There are three primary
screens MAIN, STOR and PRNT for normal operating functions, and a
SETUP screen for calibration functions.
The five sub-menu keys below the screen control the various display
functions and settings for each of the primary screen pages. Text or
icons are displayed adjacent to the sub-menu keys to denote their
function.
1.9 Data Entry
Alphanumeric values are entered via the right-hand keypad. You must
press the key from 2 to 5 times to select the required letter. (Some keys
have additional special characters not shown on the key legend).
The key will either toggle between lower and upper case characters
or when preceding a numerical entry, will set a MINUS value.
The key will toggle between 0 and a SPACE.
The key will BACKSPACE the screen cursor if you need to re-enter a
character.
The key is the RETURN key and is normally pressed to
confirm the data entry into memory.
To Next Page
Loading...
