38
No ag Pre-meal ag Post-meal ag
Fasting ag Control solution
ag
You can attach a flag to a result to indicate particular situations
while the test strip is still in the meter.
When the result is displayed right after a test, press the < or >
button to select a pre-meal flag (
), a post-meal flag( ), a
fasting flag(
) or a control solution flag( ).
When you remove the test strip while the desired flag is blinking,
the test result is stored with the flag.
If you do not want to add any flags on the test result, remove the
test strip after the test result is displayed.
Step 10
To Next Page
Loading...
