GB.82
SYSTEM SETTINGS (3/3)
Security code
Your audio system is protected by a se-
curity code (supplied by the Approved
Dealer). This is used to electronically
lock the audio system when the power
is cut (battery disconnected, system
disconnected, fuse blown etc.).
To operate the audio system, you must
enter the secret four-digit code.
Make a note of the code and keep it in
a safe place. Contact one of the manu-
facturer’s agents if you lose it.
Entering the code
The message “CODE” followed by four
empty spaces and a numerical keypad
are displayed.
Enter the corresponding code using the
digital keypad, then press “OK” to con-
firm.
Entering the code incorrectly
If the code is entered incorrectly, the
message “Incorrect PIN The system is
locked” is displayed.
Wait one minute and then re-enter the
code.
Each time the code is entered incor-
rectly, the time required before the code
can be re-entered is doubled.
To Next Page
Loading...
